The New York mechanic’s lien law attorneys here at Kushnick Pallaci PLLC often receive phone calls inquiring about the process for bonding a mechanic’s lien. Often the caller has one of the following problems: 1) he or she has not been able to get any information about the process of bonding a mechanic’s lien; 2) he or she has received the wrong information about the process for bonding a mechanic’s lien; or 3) he or she has received conflicting information about the process for bonding a mechanic’s lien and is not sure who is right.
A bond to discharge a mechanic’s lien is not as mystifying of a process as it can be made out to be when you are asking someone that doesn’t know what they are talking about. The two most common people that need to obtain a discharge bond are the property owner and the project general contractor (who is usually contractually obliged to discharge any mechanic’s liens filed by suppliers or subcontractors). A source of some of the confusion may be due to the fact that there are a few types of bonds out there that tie in with construction. For example, in addition to the bond to discharge a mechanic’s lien, there are also payment bonds, bid bonds, maintenance bonds and performance bonds (each of which serves an entirely different purpose than the bond to discharge a mechanic’s lien).
A bond to discharge a mechanic’s lien serves one simple and particular purpose: it removes the mechanic’s lien from a parcel of real property and, in essence, the mechanic’s lien then attaches to the bond until it is discharged some other way or satisfied. A discharge bond is governed by Lien Law Section 19(4). Pursuant to Lien Law Section 19(4), a mechanic’s lien may be discharged by posting a bond equal to 110% of the face value of the mechanic’s lien. This answers one of the most common questions – how much does it cost to bond a mechanic’s lien? The answer is that it always depends on the amount of the lien, but always will require at least 110% of the lien face value. It does not matter what surety you use to obtain the bond, they all must issue a bond in the amount of 110% of the face value. The only area where cost can vary is in the premium that the surety charges you to issue the bond. The premium is, of course, based upon the amount of the lien. So the cost to bond a mechanic’s lien equals 110% of the face value of the lien plus the surety’s premium.
But how do you obtain a bond? The most common way to obtain a mechanic’s lien discharge bond is to go to a surety and file a bond application. While just about any insurance company licensed and authorized to conduct business in New York can issue a mechanic’s lien discharge bond, there are certain sureties that specialize in this area and, therefore, will be more familiar with the process and, likely, able to get you through the process more quickly since they understand what they are doing. You usually will have to file an application and can pay for the bond in one of two ways: 1) you can post cash; or 2) you can post a letter of credit. Obviously if you post cash the process moves more quickly and you are very unlikely to be denied the bond since there is little risk to the surety as they are literally collecting the entire amount first and then holding it until the mechanic’s lien is discharged. If you chose to go the route of the letter of credit then the process may take a bit longer and the surety may be very selective in who it will accept a letter of credit from. One thing to keep in mind is that if you do obtain a discharge bond then the surety is almost certainly going to require that you defend and indemnify it in any action that is brought to enforce the lien. This is because once a mechanic’s lien has been bonded the surety becomes a necessary party to the foreclosure action.
Once you obtain the discharge bond you will file it with the county clerk where the mechanic’s lien was filed and serve it upon the lienor and then that’s it (not that some counties, including New York County, will require you to purchase and Index Number and submit an affirmation from an attorney requesting the discharge of the mechanic’s lien). The bond now takes the place of the property and the mechanic’s lien is no longer a concern for the property owner.